Filter
Top Products
Install Adapter Assembly
Charging Pocket Adapter Cup
The adapter cup is installed facing in one direction.
1. Slip the adapter cup into the cradle charging pocket, aligning the screw hole in the adapter cup with the screw hole in the
charging bay.
2. Using a torquing screwdriver, insert the screw in the adapter cup screw hole, and torque the screw to 6 in/lbs +/- .5
in/lbs.
Retainer Insert
The Retainer Insert has three tabs.
1. Lay the flat side of the Retainer Insert against the underside of the Retainer cap, show below.
4-6