Filter
Top Products
User Manual
Aolynk S1505L Smart Ethernet Switch
Chapter 3
Configuration
3-11
precedence. By default, the mapping is as follows: 0 and 1 are
mapped to the lowest queue, 2 and 3 to low, 4 and 5 to high, 6 and 7 to
highest.
Figure 3-9 VLAN Priority Mapping tab page
III. Priority weight
Choose [Advanced/Advanced Settings] and select the [Priority
Weight] tab to enter the [Priority Weight] tab page, as shown in
Figure
3-10
. In this page, you can configure the weights of priority queues.
The S1505L supports four priority queues for each port and
performs polling based on the priority weights of the queues. The
queues can be set to different weights; so that different service
qualities are provided for different requirements. By default, the