Filter
Top Products
User Manual
Aolynk S1505L Smart Ethernet Switch
Chapter 3
Configuration
3-13
packets with VLAN ID of 100 arriving at port 2. By default,
ingress filter is enabled.
z PVID: Used to display and configure the PVID of each port.
By default, the PVIDs displayed here are the same as the
VLAN IDs on the main configuration window.
Figure 3-11 Advanced Port Settings tab page
V. VLAN
Choose [Advanced/Advanced Settings] and click [VLAN] to enter
the [VLAN] tab page, as shown in
Figure 3-12.
The VLAN management involves creating, editing and deleting
VLAN. The management of 802.1Q-based VLAN differs from that of
port-based VLAN. Therefore, you should select the required VLAN