IBM 100/10 Network Card User Manual


 
PCM-9575 User’s Manual 4
Enhanced IDE interface: Two channels supports up to four EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4, UDMA 33
transfer. Primary IDE support up to UDMA 66/100 mode
FDD interface: Supports up to two FDDs
Serial ports: Four serial RS-232 ports, COM1, 3, 4: RS-232, COM2:
RS-232/422/485
Parallel port: One parallel port, supports SPP/EPP/ECP mode
Infrared port: Shared with COM2. Transfer rates up to 115Kbps
Keyboard/mouse connector: Supports standard PC/AT keyboard and a
PS/2 mouse
Power management: Supports power saving modes including Normal/
Standby/Suspend modes. APM 1.2 compliant
Watchdog timer: 62 level timer intervals
USB: Two universal serial bus ports (4 USB port option)
Expansion: One PCI slot and PC/104 plus connector for ISA and PCI
control board
• Solid State Disk
Supports one 50-pin socket for CFC type I/II
Supports M-Systems DOC
®
2000
1.3.2 VGA/LCD Interface
Chipset:
VIA Twister chip with integrated Savage4 2D/3D/Video Accelerator
Frame buffer:
Supports 8/16/32 MB frame buffer with system memory
Interface: 4X AGP VGA/LCD interface, Support for 9, 12, 15, 18, 24,
36 bit TFT and optional 16- or 24-bit DSTN panel
Display mode: CRT Modes: 1280 x 1024@32bpp (60Hz), 1024 x 768
@ 32bpp (85 Hz); LCD/Simultaneous Modes: 1280 x 1024 @16bpp
(60 Hz), 1024 x 768 @16bpp (60Hz)
1.3.3 LVDS: Supports 2 Channel (2 x 18 bit) LVDS interface
Chipset:
VIA VT8606T (TwisterT)
1.3.4 Audio function
Chipset: VIA 82C686 South Bridge
Audio controller: AC97 Ver. 2.0 compliant interface, Multistream
Direct sound and Direct Sound 3D acceleration
Stereo sound: 8-bit full-duplex
Audio interface: Microphone in, Line in, CD audio in; Line out,
Speaker L, Speaker R
Power: Accepts +12 V source for improved audio quality
1.3.5 TV-out (optional)
Chipset: VIA VT 1621
Supports NTSC, NTSC=EIA (Japan) and PAL TV formats