Filter
Top Products
Part 2: Configuration
The IBM High Rate Wireless LAN Gateway has a Web-based setup utility.
Note: It is not recommended that multiple users be logged into the Web-based
setup utility at the same time.
Web-based interface
The Web-based setup utility has an easy-to-use graphical user interface (GUI).
Note: Updated Web browser software can be downloaded from:
v Netscape: <http://www.netscape.com>
v Microsoft: <http://www.microsoft.com>
The Gateway is pre-configured with the default IP address of 192.168.1.1.
1. Launch your Internet browser on a computer you have configured for
TCP/IP networking.
2. Be sure that the computer and the Gateway have LAN IP addresses on the
same subnet.
3. Type http://192.168.1.1 into the Location field (in Netscape Navigator) or
the Address field (in Internet Explorer) at the top of the browser window,
and then press Enter.
Note: If the Gateway IP address has been changed, replace 192.168.1.1 with
the current IP address.
The Enter Network Password dialog box opens.
4. Type default in the Login Name field, then press Enter or click OK.
© Copyright IBM Corp. 2001 2-1