Filter
Top Products
In this table, you can change the TCP/IP settings of the Ethernet LAN interface
of the Gateway.
v MAC Address: Displays the media access control (MAC) address of the
LAN interface. It is displayed in six pairs of hexadecimal numbers.
v LAN IP Address: This is the IP address of the Gateway on the LAN/WLAN
interface. Address 192.168.1.1 is the default. This is also the IP address of
the Web-based setup utility. Valid IP address value are from 0 to 255 in the
dotted decimal form N.N.N.N. An example is the default address that client
computers on the LAN use as their default Gateway, as well as on their DNS
server if you want to use the built-in DNS feature of the Gateway.
You can change the IP address if your existing network uses a different
subnet or there is another computer with the same IP address.
Note: The value of the IP address in this table and the range of the IP
address pool in the DHCP server must be in the same subnet and
have the same subnet mask. If these values are not the same, the
DHCP server disables and will not display the warning message in
this window.
v Subnet Mask: This is the local subnet mask of the LAN interface of the
Gateway. The default is 255.255.255.0.
Click Apply to complete the LAN configuration.
5-8 IBM
®
High Rate Wireless LAN Gateway: User’s Guide