Filter
Top Products
6. Click Properties.
7. Click to check the Obtain an IP address automatically radio button.
8. Click to check the Obtain DNS server address automatically radio
button.
9. Click OK.
10. Click OK again.
11. Restart your computer. Your computer is able to access the Internet
through the server.
Note: If you do not want to use DHCP service, you must manually configure
the IP address of your computer. To manually configure the IP address
of your computer, do the following on the TCP/IP Properties page for
the network card connected to the Gateway:
1. Click to check the Use The Following IP address radio button.
2. Type the IP address for your computer.
3. Type the subnet mask. If you choose to keep the default subnet mask
setting on your server, type 255.255.255.0.
4. Type the IP address of the server in the Default Gateway field.
5. Click to check the Use the following DNS servers addresses radio button.
6. Enter the IP addresses of the DNS servers in the Preferred DNS server and
the Alternate DNS server fields.
4-4 IBM
®
High Rate Wireless LAN Gateway: User’s Guide