xii
• (Linux only) Run the dmesg command on your Linux host and provide the output.
Example
Topspin Contact Information
Topspin contact information appears in Table iii-2
# dmesg
0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 00F 0F 0 0 0 0 0 1 1 79
0d 00F 0F 0 0 0 0 0 1 1 81
0e 00F 0F 0 0 0 0 0 1 1 89
0f 00F 0F 0 0 0 0 0 1 1 91
10 00F 0F 1 1 0 1 0 1 1 99
11 000 00 1 0 0 0 0 0 0 00
12 00F 0F 1 1 0 1 0 1 1 A1
13 00F 0F 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
//content truncated
scsi : 2 hosts left.
scsi2 : srp
initializing plug timer for queue f69fce18
Starting timer : 1 1
blk: queue f69fce18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST336607FC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
initializing plug timer for queue f69fd018
Starting timer : 1 1
blk: queue f69fd018, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sdb at scsi2, channel 0, id 6, lun 0
SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
sdb: sdb1 sdb2
srp_host:
target_bindings=22000004cfe7a949.0:22000004cfe7aa7a.1:22000004cfe7aac7.2:2200000
4cfe7aadd.3:22000004cfe7ab01.4:22000004cfe7ab2f.5:22000004cfe7ab35.6:22000004cfe
7ab6c.7:22000004cfe7ab7b.8:22000004cfe7ab89.9:22000004cfe7ab8d.a:22000004cfe7ac1
f.b:22000004cfe7ac30.c:22000004cfe7ac69.d
divert: allocating divert_blk for ib0
divert: allocating divert_blk for ib1
nfs: server 10.5 not responding, still trying
nfs: server 10.5 OK
Table iii-2: Contact Information
Address Topspin Communications, Inc.
515 Ellis St.
Mountain View, CA 94043