Filter
Top Products
Fiscal interface assembly
1. Power OFF the printer by either powering off the terminal or unplugging the
external power source from the electrical outlet.
2. Remove the fiscal printer seal that covers the fiscal screw.
3. Remove the fiscal screw.
4. Remove the CompactFlash card by pressing the card eject button with a pencil.
5. Flip the printer upside down.
6. Loosen the interface assembly screw on the bottom of the printer.
Note: After the repair, follow the local procedures to reseal (if applicable) the
machine, and return the machine to service. Additional procedures or
paper work may be required.
Fiscal Screw
CompactFlash Card
Security Lock
Interface Assembly Screw
CompactFlash
Figure 2. Removing the Fiscal Screw from Rear Panel
Removal and Replacement Procedures (GY27-0366) April 3, 2003
6 4610 - K
xx
Fiscal Printer Service Supplement