Filter
Top Products
Modem Configuration Menu
The first two lines of the Modem Configuration Menu are status lines showing the
current selections. Selections are made in the two sections labeled Modem Ports and
Modem Configuration File Name. Select the serial port that you want to activate and
then select the modem configuration file for the modem on the port. If you want to
set up all of the serial ports with modems, make your selections one port at a time.
Note: Modem configuration is only supported on serial port 1 (S1) and serial port 2
(S2).
Modem Configuration Menu
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
5. none9. modem_z_sp
6. modem_f_sp 1. modem_m1_sp
7. modem_f_sp 11. modem_m_sp
8. modem_f1_sp 12. modem_m1_sp
3. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
>
For information on choosing a modem configuration file, see “Sample Modem
Configuration Files” on page 177, and “Transfer of a Modem Session” on page 183.
54 RS/6000 Enterprise Server Model H80 Series User's Guide