Filter
Top Products
LID/status connector 15
light-emitting diode 31, 32
Linear Tape-Open (LTO) Cartridge Memory (CM) 47,
48
link services, changing 24
Linux
device driver support 9
supported server and operating system 3
load and unload cycle life for data cartridge 48
loading a tape cartridge 34
loop identifier (LID)
description 7, 19
setting to add LIDs 19, 22
setting to get status of loop 19, 20
low-power mode 2
LTO cartridge memory 47
M
maintenance functions
clearing error code log 42
converting an FMR tape to a scratch tape 41
copying drive dump to tape 38
creating FMR tape 37
displaying error code log 42
forcing drive dump 38
inserting cartridge into tape drive 42
selecting 36
updating firmware from FMR tape 37
maintenance mode
exiting 45
placing the tape drive in 36
selecting a maintenance or diagnostic function 36
manual rewind tool, ordering 95
manually removing a cartridge from the drive 85
McDATA switch 6
media-related errors 82
media, using 47
Microsoft Windows 2000
device driver support 9
supported server and operating system 3
Microsoft Windows NT
device driver support 9
supported server and operating system 3
models of Ultrium 2 Tape Drive 1
mounting tape drive into an enclosure 26
N
native storage capacity 1
native sustained data transfer rate 1
O
operating systems, supported 3
operating the tape drive 31
ordering tape cartridges and supplies 63
P
panic reset, performing 33
placing the tape drive in maintenance mode 36
point-to-point connection 6
port, Fibre Channel 6
power
connecting to tape drive 27
connectors
Fibre Channel 15
SCSI 14
specifications 11
powering off the enclosure 16
problems, resolving 66
pSeries server
obtaining error information from 72
supported server and operating system 3
R
read/write capability 2
rear view
Fibre Channel drive 15
SCSI drive 14
recording method, of tape drive 2, 48
red dot 33
relative humidity specifications
for media 62
for tape drive 11
removing the tape drive from an enclosure
Fibre Channel drive 8, 84
SCSI drive 5, 83
resetting the tape drive
Fibre Channel drive 5
panic reset 33
SCSI drive 8
RS-422 connector
Fibre Channel drive 15
SCSI drive 14
RS-422 interface
connecting to the tape drive 28
updating firmware from 45
RS-422 wrap test, running 41
RS/6000
device driver support 9
obtaining error information from 72
supported server and operating system 3
RS/6000 SP
device driver support 9
supported server and operating system 3
S
safety notices, how to use vii
SAN, supported components 1, 3
SCSI drive
assigning an address 5
cables 4, 95
connecting to a bus 28
fixing errors 77
installing 5, 13
Index 119