Filter
Top Products
Chapter 2. Specifications
Table 4 gives the physical, power, and environmental specifications for the IBM
TotalStorage LTO Ultrium 2 Tape Drive. Specifications for tape cartridges are given
in “Environmental and Shipping Specifications for Tape Cartridges” on page 62.
Table 4. Specifications for the IBM TotalStorage LTO Ultrium 2 Tape Drive
Specification Measurement
Physical Specifications
Width 146.0 mm (5.75 in.) without bezel
148.3 mm (5.84 in.) with bezel
Length 205.5 mm (8.09 in.) without bezel
210.5 mm (8.29 in.) with bezel
Height 82.5 mm (3.25 in.) without bezel
84.8 mm (3.34 in.) with bezel
Weight (without a cartridge) 3 kg (6 lb 10 oz)
Power Specifications
Drive with Ultra160 SCSI Interface Drive with Fibre Channel Interface
Tolerance (see Note 1) + 5 Vdc and + 12 Vdc (±10%) + 5 Vdc and + 12 Vdc (±10%)
Power supply current for 5
Vdc (see Note 2)
1.3 A minimum 1.9 A minimum
3.1 A maximum 3.7 A maximum
Power supply current for 12
Vdc (see Note 2)
0.2 A minimum 0.2 A minimum
1.1 A maximum 1.1 A maximum
Power supply peak for 5
Vdc (the instantaneous
power by the power supply)
3.3 A for 100 ms
15.5 W
3.9 A for 100 ms
19.5 W
Power supply peak for 12
Vdc (the instantaneous
power by the power supply)
4.1 A for 2 ms
49.2 W
4.1 A for 2 ms
49.2 W
Power usage for typical idle
mode with no cartridge
10.9 W 13.9 W
Power usage for typical idle
mode with a cartridge
loaded
12.7 W 15.7 W
Power usage for reading
and writing at 6.22 m/s
29 W 32 W
Power usage for sleep
mode with no cartridge
9.0 W 12.0 W
Power usage for sleep
mode with a cartridge
loaded
10.8 W 13.8 W
Other Specifications (for both interface types)
Maximum altitude 3048 m (10,000 ft) for operating and storage
12192 m (40,000 ft) for shipping
Extraction force 250 to 750 gms-force
© Copyright IBM Corp. 2002 11