Filter
Top Products
specifications, the associated equipment shall be set to ensure that calls are
answered between 3 and 3à seconds of receipt of ringing.
v For correct operation, the total of the RN’s of all devices connected to a
single line at any time should not exceed 5.
For the modem with approval number PTC 211/01/050
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom’s network services.
This equipment is not capable, under all operating conditions, of correct
operation at the higher speeds for which it is designed. Telecom will accept no
responsibility should difficulties arise in such circumstances.
If a charge for local calls is unacceptable, the ’Dial’ button should not be used
for local calls. Only the seven digits of your local number should be dialled
from your modem. Do not dial the area code digit or ’0’ prefix.
This equipment should not be used under any circumstances that may
constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom’s Telepermit
requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the following
limits for compliance with Telecom’s specifications:
v Automatic re-attempts to the same number
There shall be no more than 10 call attempts to the same number within
any 30 minute period for any single manual call initiation, and The
equipment shall go on-hook for a period of not less than 30 seconds
between the end of one attempt and the beginning of the next call attempt.
v Automatic calls to different numbers
Automatic calls to different numbers shall be spaced such that there is no
less than 5 seconds between the end of one call attempt and the beginning
of another.
v Call answering
The associated equipment shall be set to ensure that calls are answered
between 3 and 30 seconds of receipt of ringing.
72 ThinkPad
®
R30 Series Service and Troubleshooting Guide