I-Data 812-1x MIO Network Card User Manual


 
ida 812-1x MIO Operator’s Guide
Installation
-13-
2.3.4. HP LaserJet 5Si
1.Loosen the screws and remove the plate of the top slot
positioned on the rear of the printer.
2.Insert the ida 812-1x MIO interface in the slot and tighten screws.
2.3.5. HP PaintJet XL300
1. Loosen the screws on the cover plate positioned at the centre
of the rear panel and remove the plate.
2. Insert the ida 812-1x MIO interface (twinax connector at the left)
in the slot and tighten screws.
2.3.6. HP DeskJet 1200 C
1. Loosen the screws and remove the plate positioned on the rear
of the printer.
2. Insert the ida 812-1x MIO interface (twinax connector at
the left) in the slot and tighten screws.
2.3.7. HP DeskJet 1600 C
1. Remove the HP JetDirect card from the slot on the rear of the
printer by loosening the screws and pulling the card out of the
printer.
2. Insert the ida 812-1x MIO interface (twinax connector to the
left) in place of the card you just removed and tighten screws.
2.3.8. HP Color LaserJet
1. Remove the HP MIO (Modular Input/Output) card from the slot
on the rear of the printer by loosening the screws and pulling
the card out of the printer.
2. Insert the ida 812-1x MIO interface (twinax connector at the
bottom) in place of the card you just removed and tighten
screws.
For all printers: Complete the installation by attaching the label
to the front of the printer.