I-Data 812-1x MIO Network Card User Manual


 
ida 812-1x MIO Operator’s Guide
Front Panel Seup
-24-
Mark with an asterisk *:
Press ENTER
Go to next setting:
Press ITEM
Save settings:
After change of settings, you toggle to SAVE MENU using ITEM
key and press ENTER.
SAVE SETT.= NO* will appear in the display. To select YES, you
press + or - key. When YES appears, you press ENTER to mark
YES with an *.
Press ONLINE (se NOTE above).
5.1.2. General Description of Menus
Below is a short description of what the different menus are used
for. All these front panel menus provide an alternative/supplement
to setting up the interface via FSL:
NON-IPDS MENU
Can be used as an alternative/supplement to non-IPDS
configuration using FSL functions.
TEST MENU
Used for generating settings printout and HEX dumps.
PAPER MENU
Used to set up the number of installed trays and tray
features. By definition, a tray is always present in the FSL
environment, consequently this setting has no effect in the
non-IPDS emulations.
SETUP MENU
This menu is currently only vailable in IPDS mode.
SAVE MENU
Each time changes have been made to the non-IPDS menu
settings, these must be saved in the permanent memory in
order to take effect at the next power-on cycle. You can also
restore factory default or just user settings via this menu.