Filter
Top Products
12
Deleting Community Strings
To delete all community strings, perform the following:
Press
U
. The "Are you sure you want to delete all future strings?" prompt is displayed.
Press
Y
when prompted to proceed and delete all community strings,
N
to abort.
Press
Enter
to finish.
This function will delete ALL community strings. To selectively delete community
strings, use iView
2
(iConfig view) to configure the device.
Ending the Session
Press
E
to end a serial port or Telnet/HyperTerminal session before disconnecting the
serial cable. This will stop the continuous stream of data to the serial port.
Rebooting the Unit
To reboot the IE-iMcV-MultiWay, type
reboot
from the main screen or the command
menu.
Enabling/Disabling DHCP
To toggle DHCP on the IE-iMcV-MultiWay between enable and disable, press
D
and
then
Y.
Press the
spacebar
once to return to the main screen without making any
changes.