Filter
Top Products
23
VLAN Configuration
The ports can be assigned as a trunk or access port.
When configuring a trunk port, an Ethertype can be user-defined (a trunk port is also
defined as a provider port based on 802.1ad). If an Ethertype value comes in a trunk
port and is different than the user-defined Ethertype, it will be treated as an
unrecognized value and discarded. If configuring the port as an access port, enter a
VLAN ID between 1 and 4,094. Possible priority settings are 0 (lowest priority)
through 7 (highest priority).
NOTE
When an Ethertype or VLAN ID is assigned, the same values need to be configured at the end
device (router, etc) to avoid network configuration problems.