Filter
Top Products
14
Commands List (Space Bar)
The IE-iMcV-MultiWay also includes several device-specific options. To access these
options, press the
Space Bar
from the Main Configuration screen, type the name of
the action to be performed (as shown below) and press
Enter
.
Command Description
cleandb Reboots the unit with a clean database. This removes all information from
the database and sets the unit to factory defaults.
download Downloads firmware via the TFTP protocol.
accounts Allows the addition for User, Superuser, Admin
vlan Provides selection of two modes of operation to support all VLAN
configurations
version Displays the unit’s firmware and hardware version
ifstats Displays interface statistics.
rmstats Displays remote monitoring (RMON) statistics on packets received as defined
in RFC 2819 for RMON.
sysdescr Allows the editing of sysName, sysDescr, and Port information
reboot Allows a soft reboot of the unit after changes are made by the end user
oam Enable/disable OAM.
sfpstats Provides information about the wavelength, serial number, output power,
BER and other information. Requires an SFP with DDMI.