Filter
Top Products
3. PRINTER FUNCTIONS
KPM210/216
123-
[Notes] • The character spacing is added on right of each character.
• The right character spacing for double-width mode is twice
the normal value.
When the characters are enlarged, the right side character
spacing is m (2 or 4) times the normal value.
• The horizontal and vertical motion units are specified by GS
P. Changing the horizontal or vertical motion units does not
affect the current right side spacing.
• The GS P command can change the horizontal (and verti-
cal) motion unit. However, the value cannot be less than the
minimum horizontal movement amount.
• In standard mode, the horizontal motion unit is used.
• The maximum right side spacing is:
255/204 inches for the 204 dpi model
255/300 inches for the 300 dpi model.
[Default] n = 0
[Reference] GS P or GS $D0
[Example]
n!CSEn!CSE
n!CSE
n!CSEn!CSE
[Name] Select print modes
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
[Range] 0 ≤ n ≤ 255
[Description] Selects print modes using n (see table below):
(Tab.A.3)
www.ipcprint.com