Filter
Top Products
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
353-
[Default]
[Reference] ESC ³, ESC ², ESC ¦
[Example]
n³CSEn³CSE
n³CSE
n³CSEn³CSE
[Name] Transfer flash bank into graphic page
[Format] ASCII ESC ³ n
Hex 1B FC n
Decimal 27 252 n
[Range] n = 1
[Description] Transfers flash bank into graphic page used at the moment
n selects the flash bank as follows:
nnoitcnuF
1marotni1ogolknabhsalfsrefsnarT
[Notes] • Don’t lose the logo holded into the graphic page don’t send,
after this command, other control characters to the printer
which operate on the printing buffer (LF, FF) as the logo print-
ing buffer and the characters is the same. The only com-
mands which don’t cancel the logo stored in the graphic page
are the commands ESC ·, ESC ¹, ESC ¦ and the status com-
mands.
• To print strings character and logo from ram proceed as
follows :
1) send strings character with a LF ending command;
2) send 0x1B 0xFC 0x01 for transfer logo into ram;
3) send 0x1B 0xFA 0x00 xH xL yH yL to print logo.
[Default]
[Reference] ESC ·, ESC ², ESC ¦
[Example]
www.ipcprint.com