Filter
Top Products
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
473-
[Description] Sets the printing area width to the area specified by nL and
nH.
• The value of nMax is :
- 1664 for the 204 dpi model
- 2484 for the 300 dpi model
• The left margin is set to [(nL + nH × 256) × (horizontal mo-
tion unit)] inches.
Printable area
Left margin Printing area width
[Notes] • This command is only enabled if set at the beginning of the
line.
• If the right margin is greater than the printable area, the
printing area width is set at maximum value.
• If the printing area width = 0, it is set at the maximum value.
• The horizontal and vertical motion units are specified by
GS P. Changing the horizontal or vertical motion unit does not
affect the current left margin.
• The GS P command can change the horizontal (and verti-
cal) motion unit.
• However, the value cannot be less than the minimum hori-
zontal movement amount and it must be in even units of the
minimum horizontal movement amount.
[Default]
[Reference] GS L, GS P
[Example]
mtr^SGmtr^SG
mtr^SG
mtr^SGmtr^SG
[Name] Execute macro
[Format] ASCII GS ^ r t m
Hex 1D 5E r t m
Decimal 29 94 r t m
[Range] 0 ≤ r, t ≤ 255
www.ipcprint.com