Filter
Top Products
24
PC Screen Saver Off: prevents your computer from going into Screen Save
mode. This feature is only available if the USB portion of the computer cable
is connected to your computer (
page 5).
Power Save: automatically turns the lamp off after no signals are detected
for 20 minutes. After 10 additional minutes with no signal, the projector
powers down. If an active signal is received before the projector powers
down, the image will be displayed.
Screen Save: automatically blanks the screen with a black color after no sig-
nals are detected for a preset number of minutes. The image returns when
an active source is detected or a remote or keypad button is pressed. Screen
Save is disabled when Power Save is enabled.
Startup Logo: allows you to display a blank Black, White, or Blue screen
instead of the default screen at startup and when no source is detected.
Blank Screen: determines what color is displayed when no source is
detected3.
System
Screen Save
Startup Logo
Blank Screen