Filter
Top Products
Setup Page 9
4. Align the rectangular brackets with the screw holes on the tablet and using the screws
from Step 3, secure the sound bar against the bottom edge of the tablet.
5. Connect one end of the AC power cord to the AC In jack on the back of the sound bar.
6. Connect the other end of the AC power cord to the AC Out jack on the Bottom
Connector Panel of the tablet.
7. Plug the sound bar’s audio cable into the Audio Out (RCA R/L) jack on the Side
Connector Panel located on the back of the tablet.
8. Turn the power switch ON.
9. Route the power cord and audio cable through the large bracket and align the bracket
against the back side of the tablet and sound bar.
10. Fasten the bracket securely to the tablet and sound bar with the four remaining screws.
Power Switch