Filter
Top Products
Setup Page 11
For additional accessory options, such as stands, carts and wall mounts, see the InFocus
website (www.infocus.com/store) or your local dealer.
Attaching the HD Video Conferencing Camera
1. Remove plastic film.
2. Align the camera bracket with the screw holes on the top edge of the backside of the
tablet and then secure the camera to the tablet with the two provided thumb screws.
3. Plug the USB cable into an available USB slot on the back of the tablet.
4. Manually tilt and pan the camera (+/- 40°) as desired.
WARNINGS:
This tablet is very heavy and should be moved by at least two individuals.
Three screw holes have been included in each leg to allow you to adjust the height of
the tablet. Regardless of the height, you must use two of the screw holes in each leg.
Failure to do so may result in the screw begin sheared off and the leg collapsing.
When mounting the tablet to a wall, metric 8 (12mm) screws must be used. In
addition, the mounting interface should comply with the UL1678 standard in North
America. The mounting means should be strong enough to bear the weight of the
monitor (approximately 114.2 lbs/51.8 kg without the stand).