Filter
Top Products
EonStor A08U/A12U-G2421 Installation and Hardware Reference Manual
5.3.3 DIMM Module Installation
WARNING!
The pre-installed modules must be removed prior to installing new memory
modules. Do this with care. Sensitive components can be damaged during the
process.
If a DIMM module fails or a DIMM module with a higher memory capacity is
required, the DIMM module must be replaced.
Step 1. Remove the controller module. See Section 5.2.3.
Step 2. Remove the previously installed DIMM module from the DIMM
socket. To do this, push the white module clips on the sides of the
DIMM module down together. By doing this, the previously
installed modules will be ejected from the DIMM socket. (See
Figure
5-2)
Figure
5
-2: Push Back the Module Clips on the Sides of the DIMM
Socket
Step 3. Gently retrieve the DIMM module out of the DIMM socket. (See
Figure
5-2)
Step 4. Insert the DIMM module into the DIMM socket. Align the DIMM
module with the DIMM socket. Once aligned, gently push the
DIMM module into the socket. The white clips on the sides of the
socket will close automatically and secure the DIMM module into
the socket.
5-6
Replacing or Upgrading Memory Modules