Filter
Top Products
2
Frequently asked questions
Does each port operate at 10Mbps or 100Mbps?
Yes. Each port on the Express 130T Standalone Hub is capable of
10Mbps or 100Mbps half-duplex operation.
Do I have to set a port’s speed?
No. Ports on the Express 130T Standalone Hub automatically detect
and match the speed of an attached device.
Do ports operating at different speeds communicate with each
other?
Yes. The Express 130T Standalone Hub’s internal bridge allows all
ports to communicate with each other, regardless of operating speed.
Can I connect the Express 130T Standalone hub to another hub?
Yes. For connection guidelines, see “Connecting to Hubs and
Switches” on page 6.
Can I configure the Express 130T Standalone Hub for full-duplex
operation?
No. Hubs do not support full-duplex operation.
Can I wall mount the Express 130T Standalone Hub?
Yes. Using the two wall mount hole guides on this page, mark and drill
into the wall where you want to mount the hub. Then insert the
provided screws into the wall and hang the hub.
6.00" (15.24 cm.)
Wall mount hole
guides