Filter
Top Products
3
Overview
The Intel Express 130T Standalone Hub is an 8-port hub that operates
at 10 or 100Mbps.
• All ports on the hub are capable of 10 or 100Mbps half-duplex
operation.
• Each port on the hub automatically detects the highest possible
speed of an attached device (either 10Mbps or 100Mbps) and
matches that speed.
• The Express 130T Standalone Hub’s internal bridge allows all ports
to communicate with each other, regardless of operating speed.
• The Intel Express 130T Standalone Hub monitors port status,
network traffic, and collisions at both 10 and 100Mbps.
This User Guide describes how to install, connect, and troubleshoot the
hub.
Contents
Overview ................................................................................................3
Connection Guidelines ...........................................................................4
Connecting to 100Base-TX devices................................................4
Connecting to 10Base-T devices.....................................................4
LED Indicators .......................................................................................5
Autodisabled Ports .................................................................................5
Connecting to Hubs and Switches..........................................................6
Connecting to another 130T hub.....................................................6
Connecting to a 100Mbps hub ........................................................6
Connecting to an existing 10Mbps segment ...................................7
Connecting to a switch....................................................................8
Troubleshooting .....................................................................................9
Cabling Requirements ..........................................................................10
Limited Hardware Warranty ................................................................ 12