Filter
Top Products
20 536EX Chipset Developer’s Manual
Intel Confidential
AT Command Summary Tables
\K2
connect state, transmits
Enters command mode,
no break sent
command state, transmits
Nondestructive/expedited
connect state, receives
\K3
connect state, transmits
Nondestructive/expeditedcommand state, transmits
connect state, receives
\K4
connect state, transmits
Enters command mode,
no break sent
command state, transmits
Nondestructive/
nonexpedited
connect state, receives
\K5
connect state, transmits
Nondestructive/
nonexpedited
command state, transmits
connect state, receives
* \T0 Disables inactivity timer 0 0–90 yes
* \Xn Set XON/XOFF pass-through 0 0, 1 yes
\X0 Processes flow control characters
\X1
Processes flow control characters and passes to local
or remote
* -Jn Set V.42 detect phase 1 0, 1 yes
-J0 Disables the V.42 detect phase
-J1 Enables the V.42 detect phase
* “Hn V.42 bis compression control 3 0–3yes
“H0 Disables V.42 bis
“H1 Enables V.42 bis only when transmitting data
“H2 Enables V.42 bis only when receiving data
“H3
Enables V.42 bis for both transmitting and receiving
data
“On V.42 bis string length 32 6–250 no
+DR=m Controls data compression reporting 0 0, 1 no
m=0 Disabled
m=1 Enabled
* +DS=m Controls V.42 bis data compression
3, 0,
2048, 6
See note yes
Table 6. V.44/V.42/V.42 bis MNP Command Summary (Continued)
Note Command Function Default Range
Reported
by &Vn
* Value saved in NVRAM.