Filter
Top Products
A300 Motherboard
Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the motherboard. Carefully route the cable and avoid heat generating chips
and fan blades. See
Figure 5-5. Step 0:
Figure 5-5: Connect the cooling fan cable
5.4 DIMM Module Installation and CF Card Installation
5.4.1 DIMM Module Installation
WARNING:
Using incorrectly specified DIMM may cause permanently damage the
A300. Please make sure the purchased DIMM complies with the
memory specifications of the A300. DIMM specifications compliant with
the A300 are listed in Chapter 2.
The A300 has one DDR SDRAM DIMM socket. Follow the steps below to install the DIMM
module.
Step 1: Make sure the two handles of the DIMM socket are in the "open" position,
leaning outward (
Figure 5-6).
Page 68