Filter
Top Products
7BPC-500-5820 User's Manual
Basic installation
1. CPU
2. Memory module
3. Hard Disk Drive
4. Wall-mount kit
Removing Top Cover
1. On the both sides, locate
the two screws that secure
the top cover to the chas-
sis.
2. Use screw drvier to remove
the top cover screws. Keep
the screws safely for later
use.
3. Pull the top cover slightly
upward the main unit until
the side tabs are disen-
gaged from chassis.
4. If you feel it's hard to pull
up the top cover, just loose
the screws that secure the
main unit on each side a
little bit. Then, you may pull
up the top cover easily.
1
3
2 4
Hardware Installation