Intel D845EPT2 Computer Hardware User Manual


 
Intel Desktop Boards D845EPT2 and D845EBG2 Product Guide
14
Audio Subsystem
The audio subsystem features the following:
Intel 845E chipset (AC 97)
Analog Devices AD1981A audio codec
NOTE
The line out connector, located on the back panel, is designed to power either headphones or
amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
Audio drivers and utilities are available from Intels customer support World Wide Web site:
http://support.intel.com/support/motherboards/desktop/
LAN Subsystem (Optional)
The optional Intel 82562ET (with the Intel 82801DB ICH4) provides a Fast PCI LAN subsystem
providing both 10Base-T and 100Base-TX connectivity. The Intel 82562ET provides the
following functions:
Basic 10/100 Ethernet LAN connectivity
Supports RJ-45 connector with status indicator LEDs
Programmable transit threshold
Configurable EEPROM that contains the MAC address
LAN Subsystem Software
For LAN software and drivers, refer to the Desktop Board D845EPT2 or D845EBG2 link on
Intels World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
RJ-45 LAN Connector LEDs
Two LEDs are built into the RJ-45 LAN connector. Table 3 describes the LED states when the
board is powered up and the LAN subsystem is operating.
Table 3. RJ-45 LAN Connector LEDs
LED Color LED State Indicates
Off 10 Mbit/sec data rate is selected. Green
On 100 Mbit/sec data rate is selected.
Off LAN link is not established.
On (steady state) LAN link is established.
Yellow
On (brighter and pulsing) The computer is communicating with another computer on the
LAN.