Intel D945GSEJT Computer Hardware User Manual


 
9
1 Desktop Board Features
This chapter briefly describes the main features of Intel
®
Desktop Board D945GSEJT.
Table 1 summarizes the features
of the Desktop Board.
Table 1. Feature Summary
Form Factor
Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170 millimeters
[6.7 inches] x 170 millimeters [6.7 inches])
Processor
Passively-cooled, soldered-down Intel
®
Atom
processor N270
Main Memory
One 200-pin Double Data Rate 2 (DDR2) Small Outline Dual Inline
Memory Module (SO-DIMM) socket with gold-plated contacts
Support for DDR2 533 MHz SO-DIMMs (DDR2 800 MHz and
DDR2 667 MHz validated to run at 533 MHz only)
Support for up to 2 GB of system memory
Chipset
Passively cooled mobile Intel
®
945GSE Express Chipset consisting of:
Intel
®
82945GSE Express Chipset Graphics and Memory Controller
Hub (GMCH)
Intel
®
82801GBM I/O Controller Hub (ICH7-M)
Internal Graphics
Intel
®
Graphics Media Accelerator 950 (Intel
®
GMA 950) onboard
graphics subsystem with support for:
Analog displays (VGA)
Digital displays (DVI-D)
Audio
RealTek* ALC662 audio codec for 2 + 2-channel (multi-streaming)
Intel
®
High Definition Audio (Intel
®
HD Audio):
Front panel microphone/headphone header
S/PDIF digital audio header
Internal mono speaker header
Expansion
Capabilities
One PCI* bus add-in card connector
One PCI Express* Full-Mini Card slot
Peripheral
Interfaces
Seven USB 2.0 ports:
Three back panel ports
Four front panel ports (via two internal headers; one header
supports an Intel
®
Z-U130 USB Solid-State Drive (or compatible
device))
One parallel ATA (PATA) interface (44-pin) with ATA-100/66 support
Two Serial ATA (SATA) 3.0 Gb/s connectors (supporting IDE and
ACHI)
One SATA device power connector
Legacy I/O Control
Winbond* W83627DGH-A legacy I/O controller:
Two serial port headers
One parallel port header
One PS/2 keyboard header
Hardware Monitor
Subsystem
Hardware monitoring through the Winbond I/O controller
Voltage sense to detect out of range power supply voltages
Thermal sense to detect out of range thermal values
One fan header
One fan sense input used to monitor fan activity
Fan speed control