Filter
Top Products
GA-EQ45M-S2 Motherboard - 86 -
Step 1:
On the View menu of the Intel Matrix Storage
Console, select Advanced Mode for a more
detailed view of the storage device information.
Step 2:
The new hard drive appears under Non-RAID
Hard Drive. Right-click on the new hard drive
and select Rebuild to this Hard Drive.
Step 3:
Click Next when the Rebuild RAID Volume
Wizard appears. Follow the on-screen instruc-
tions to proceed.
Step 4:
To check the rebuild status during the rebuild
process, right-click on the rebuild volume and
select Show Rebuild Progress.
Step 5:
When the message "The rebuild was completed
successfully," appears, click OK to complete.
Step 6:
After the RAID 1 volume rebuilding, click the
volume and its status in the information pane
will display as Normal.
While in the operating system, make sure the chipset driver has been installed from the motherboard
driver disk. Then launch the Intel
®
Matrix Storage Console from Programs in the Start Menu.
Performing the Rebuild in the Operating System