Filter
Top Products
22
3.21 CompactFlash
™
Connector
The HS-2606 also offers an optional CompactFlash
™
connector which
is IDE interface located at the solder side of the board (beneath the
SO-DIMM connector). The designated CN14 connector, once soldered
with an adapter, can hold CompactFlash™ cards of various sizes.
Please turn off the power before inserting the CD card.
CN14: CompactFlash Connector
PIN Description PIN Description
1 GND 26 N/C
2 SDD3 27 SDD11
3 SDD4 28 SDD12
4 SDD5 29 SDD13
5
SDD6
30
SDD14
6 SDD7 31 SDD15
7 -SDCS1 32 -SDCS3
8 GND 33 N/C
9 GND 34 -SDIOR
10
GND
35
-SDIOW
11 GND 36 4.7K
Ω
pull to VCC
12 GND 37 IRQ15
13 VCC 38 VCC
14 GND 39 N/C
15 GND 40 N/C
16 GND 41 10K
Ω
pull to VCC
17 GND 42 SHDRDY
18 SDA2 43 SDDACK
19 SDA1 44 SDDREQ
20 SDA0 45 HDD LED
21 SDD0 46 4.7K
Ω
pull to VCC
22 SDD1 47 SDD8
23
SDD2
48
SDD9
24 470
Ω
pull to GND 49 SDD10
25 N/C 50 GND
Inserting a CompactFlash
™
card into the adapter is not a difficult task.
The socket and card are both keyed and there is only one direction for
the card to be completely inserted. Refer to the diagram on the
following page for the traditional way of inserting the card.