Filter
Top Products
Installation
Page 3-2
Easy Installation Procedure
The following must be completed before powering on your new system:
3-1. CPU Installation
3-2. Jumper Settings
3-3. System Memory
3-4. VGA card installation
3-5. Device Connectors
3-1 CPU Installation
Step 1
Open load plate ( A ) , DO NOT touch
socket contacts ( B ).
Step 2
Remove protective cover ( C ) from load
plate. Please do not discard the protective
cover. Always replace the protective cover if
the processor is removed from the socket.
1
2
<Figure 1>
<Figure 2>