L440GX+ Server Board Product Guide 57
Security Add-in
Under this window, you can set the User and Administrator passwords, and security options.
To Set the User Password
1. Click on the user password button.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the User Password
1. Click on the User password button.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank to clear).
To Set the Administrator Password
1. Click on the Administrator password button.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the Administrator Password
1. Click on the Administrator password button.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank to clear).
Security Options
Under this window, you can set the other security options:
• Hot Key - Set a key sequence that, when pressed, will drop the server into secure mode.
• Lock-Out Timer - Set an interval that, if no activity takes place during it, will drop the server
into secure mode.
• Secure Boot Mode - Force the server to boot directly into secure mode.
• Video Blanking - Turn off the video when the server is in secure mode.
• Floppy Write - Control access to the diskette drive while the server is in secure mode.
• Reset/Power Switch Locking - Control the power and reset buttons while the server is in
secure mode.