Intel L440GX Server User Manual


 
7
1 Description
Server Board Features
Table 1. Server Board Features
Feature Description
Processor
Installed: Up to two Intel
®
Pentium
®
II or Pentium III processors (with 100 MHz
system bus) operating at 1.8 V to 3.5 V. The server board’s voltage regulator is
automatically programmed by the processor’s VID pins to provide the required
voltage.
Memory (DRAM)
Four 72 bit sockets for 168-pin, gold contact, 100 MHz, PC/100 compliant, ECC
or non-ECC, registered or unbuffered, SDRAM dual inline memory
modules (DIMM).
Video Memory Installed: 2 MB of video memory.
PCI bus Four standard PCI (PCI-33/32 bit) expansion slots for add-in boards. 1x32 bit
PCI bus. Embedded devices: Video Controller, Network Interface Controller
(NIC), and SCSI controller.
Two PCI-66 MHz 32 bit 5 Volt expansion slots (backward compatible to PCI-33
MHz 32 bit).
ISA bus One ISA expansion slot for an add-in board. Embedded PC-compatible support
(serial, parallel, mouse, keyboard, diskette, and Plug and Play features).
Server Management Thermal/voltage monitoring and error handling.
Real time clock/calendar (RTC).
Front panel controls and indicators (LEDs).
System Setup Utility (SSU).
Basic Input/Output System (BIOS), Power On Self Test (POST), and Setup
stored in flash memory.
Graphics Integrated onboard Cirrus Logic
CL-GD5480 super video graphics array
(SVGA) controller.
SCSI
Adaptec
AIC-7896, supporting onboard Ultra2 (LVD) wide and Ultra-wide SCSI
interfaces. Support for the Adaptec ARO-1130U2 RAIDport
III card is built into
PCI slot 4.
Network
Integrated onboard NIC, an Intel
®
82559 single chip PCI LAN controller for 10 or
100 Mbps TX Fast Ethernet networks. RJ-45 Ethernet connector and indicator
LEDs at I/O back panel.
System I/O
PS/2-compatible keyboard and mouse ports, 6 pin DIN.
Advanced parallel port, supporting Enhanced Parallel Port (EPP) level 1.7 and
1.9, ECP, compatible 25 pin.
VGA video port, 15 pin.
Two serial ports, 9 pin.
RJ-45 Ethernet port.
Two USB ports.
Form Factor Server ATX form factor, 12 × 13 inches, ATX 2.01 compliant I/O.