Intel L440GX Server User Manual


 
L440GX+ Server Board Product Guide 69
Connect
When [Re]Connect is selected from the Connect menu, the Connect dialog in Figure 11 is
displayed. This dialog allows you to connect to a server. If the client machine is already connected
to a server, initiating connection generates a warning message. The message indicates that the
existing connection will be terminated if you continue trying to initiate the new connection. You
are prompted to enter the EMP password whenever a connection is attempted.
Figure 11. Connect Dialog
Options available in the dialog are:
Line Selection - you can specify whether to use a direct connection or dial-up modem
connection to the server.
Dial-up - connects to a selected server with a modem.
Direct connect (Serial Line) - connects to the selected server directly using a null modem
serial cable.
Server - a server name can be selected from the dropdown list of available servers. A server
must be selected when the line selection is Dial-up.
Serial Line - These options are enabled when the line selection is set to Direct connect
(Serial Line).
Baud Rate - must be 19200 for EMP to connect properly.
COM Port No. - set the COM Port number to the port which the null modem serial cable is
connected to.
Connect - initiates the connection to the connected server. When this button is clicked, you are
prompted for the EMP password.
Config - displays the Phonebook dialog.
Cancel - exits the Connect dialog without taking any action.
Help - displays the help information for this dialog.