Filter
Top Products
L440GX+ Server Board Product Guide 67
Main EMP Console Window
The main EMP Console window provides a graphical user interface (GUI) to access server control
operations and to launch the management plug-ins. At the top of the window is the menu and tool
bar. These provide the options to initiate plug-ins and other support features. A status bar at the
bottom displays connection information such as server name, line status, and mode.
Toolbar
The tool bar buttons of the EMP Console main window combine server control and management
plug-in commands available from both the Connect and Action menus as follows:
Displays the Connect dialog to allow connection to a selected server.
Disconnects from the currently connected server.
Displays the Power On/Off dialog.
Displays the Reset dialog.
Launches the SEL Viewer.
Launches the SDR Viewer.
Launches the FRU Viewer.
Displays the Phonebook Dialog.
Displays the online help.
Status Bar
The status bar is displayed at the bottom of the main window. It contains the following status
information:
• SERVER NAME: The name of the connected server when connecting via modem.
• LINE: The type of line connection. This is either direct or modem.
• MODE: Either Redirect of EMP, depending on whether the EMP has control of the
COM2 port.
• LINE STATUS: Gives status information about the server connection. For example, if a
server is connected, the status bar says "Connected." Otherwise, the line is blank.