Intel MIC-3358 Printer User Manual


 
MIC-3358 User’s Manual 4
Chipset: Intel® 845E/ICH4 Chipset
Front Side Bus: 400MHz (Intel® Pentium® 4 processor-M Processor)
Bus Interface: PCI 32-bit/33 MHz
2nd level cache: Built-in 512KB on Intel® Pentium® 4 processor-M
die
RAM: 512MB ECC DDR266 memory on board. Support up to 2GB
ECC DDR200/266.
Enhanced IDE interface: Two channels handles one 2.5” IDE in SBC
and two IDEs in RIO module via J3 connector. Supports PIO mode 4
and ATA 33/66/100 mode. One IDE connector and space reserved for
embedded 2.5” HDD.
Serial ports: One RJ-45 COM1 port (RS-232 interface) with 16C550
compatible UARTs
USB port: Two USB ports with fuse protection comply with USB
specification 2.0/1.1
CompactFlash socket: one CompactFlash socket on board.
PMC expansion slot: One 32bit/33MHz PCI Mezzanine site on board
with +5V/+3.3V compliant.
Watchdog timer: It provides system reset, interrupt and NMI support
via software control. Time interval is from 1 to 255 seconds.
PCI-to-PCI Bridge
Controller chip: One PCI-to-PCI bridge controller chip provides mas-
ter and drone mode
• (Master mode) Supports up to seven bus masters peripherals on each
bus segment
• (Drone mode) it could plug into a peripheral slot as a “drone mode” ,
whereby it functions as stand-alone computer.
10/100/1000Base-TX Ethernet Interface
Controller chips: Two Intel® 82540EM Gigabit Ethernet controller
chips provides Dual Gigabit ports
• One front RJ-45 Gigabit LAN port
• 10 Mbps, 100 Mbps and 1000Mbps auto-switching
PCI VGA Interface
Controller: ATI Rage XL
• PCI 2.2 compliant, 32bit/33 MHz