Filter
Top Products
51 Chapter 4
4.1.2 Standard CMOS Setup
The items in Standard CMOS Setup Menu are divided into 11 categories.
Each category includes no, one or more than one setup items. Use the
arrow keys to highlight the item and then use the <PgUp> or <PgDn>
keys to select the value you want in each item.
Figure 4.2: Standard CMOS setup screen.
Primary Master/Primary Slave/Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<-> to select Manual, None, Auto type. Note
that the specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter improper information for
this category. If your hard disk drive type is not matched or listed, you
can use Manual to define your own drive type manually. If you select
Manual, related information is asked to be entered to the following items.
Enter the information directly from the keyboard. This information
should be provided in the documentation from your hard disk vendor or
the system manufacturer.
4.1.3 Advance BIOS Features Setup
The "Advance BIOS FEATURES" screen will appear after the BIOS
FEATURES SETUP item from the CMOS SETUP UTILITY Menu was
chosen. This screen allows the user to configure the board according to
his particular requirements. Below are some major items that are pro-
vided in the BIOS FEATURES SETUP screen: