Filter
Top Products
MIC-3358 User’s Manual 62
operating system such as Windows® 95/98. If you set this field to "man-
ual" choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a "y"). The settings are:
Auto (ESCD) (Default), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled (Default).
4.1.8 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall sys-
tem status. This is only available if there is Hardware Monitor onboard.
Figure 4.8: PC Health setup screen
Current CPU Temp./ Vcpu-core/Vtt/+3.3V/+5V/+12V/-12V/VBAT
(V)
This show system health status.
4.1.9 Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box
with a message similar to: