Filter
Top Products
Installing Red Hat* Enterprise Linux 4*
Intel® Server Board S5000PAL
45
Time Zone Configuration
Set your time zone by selecting the city closest to your computer’s physical location.
There are two ways for you to select your time zone:
1) Using your mouse, click on the interactive map to select a specific city (represented by a yellow
dot). A red X appears indicating your selection.
2) You can also scroll through the list at the bottom of the screen to select your time zone. Using your
mouse, click on a location to highlight your selection.
Figure 4-18. Configuring the Time Zone
3) Select System Clock uses UTC if you know that your system is set to UTC.
Tip:To change your time zone configuration after you have completed the installation, use the Time
and Date Properties Tool.
Type the system-config-date command in a shell prompt to launch the Time and Date Properties
Tool. If you are not root, it prompts you for the root password to continue.
To run the Time and Date Properties Tool as a text-based application, use the command timeconfig.