Filter
Top Products
42 SBC-455 User's Manual
Set this option to Enabled to permit drives A: or B: to be swapped.
The settings are Enabled or Disabled. The default settings are
Disabled.
Floppy Drive Seek:
Set this option to Enabled to specify that floppy drive A: will
perform a Seek operation at system boot. The settings are Enabled
or Disabled. The Optimal and Fail-Safe default settings are
Disabled.
Mouse Support:
When this option is set to Enabled, AMIBIOS supports a PS/2-
type mouse. The settings are Enabled or Disabled. The default
settings are Enabled.
System Keyboard:
This option specifies that a keyboard is attached to the computer.
The settings are Present or Absent. The Optimal and Fail-Safe
default settings are Present.
Primary Display:
This option specifies the type of display monitor and adapter
in the computer. The settings are Mono, CGA40, CGA80,
EGA/VGA, or Absent. The Optimal and Fail-Safe default settings
are EGA/VGA..
Turbo Switch:
Set this option to Enabled to permit AMIBIOS to control the
hardware turbo (speed) switch. The settings are Enabled or
Disabled.
Floppy Drive Swap:
Display Device:
This option allows user to select display device. The settings are
CRT, LCD, and Both. The Fail-Safe default setting is Both.