Filter
Top Products
Chapter 3 AMI WinBIOS
setup 43
Password Check:
This option enables password checking every time the computer is
powered on or every time WINBIOS Setup is executed. If Always is
chosen, a user password prompt appears every time the computer
is turned on. If Setup is chosen, the password prompt appears if
WINBIOS is executed. The Optimal and Power-On defaults are
Setup.
Parity Check:
Set this option to Enabled to check the parity of all system memory.
The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Disabled.
OS/2 Compatible Mode:
Set this option to Enabled to permit AMIBIOS to run with IBM OS/
2. The settings are Enabled or Disabled. The default settings are
Disabled.
Wait for F1 if Error:
AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this option is set to Disabled, AMIBIOS does not wait for you to
press the <F1> key after an error message. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default settings
are Enabled.
Hit Del Message Display:
Set this option to Disabled to prevent :
Hit <DEL> if you want to run Setup
from appearing on the first AMIBIOS screen when the computer
boots. The settings are Enabled or Disabled. The Optimal and
Fail-Safe default settings are Enabled.