Intel TS-ASP3 Personal Computer User Manual


 
HARDWARE INSTALLATION 13
2.4.2 Floppy Disk Drive Connector (34-pin FDC)
This connector supports the floppy disk drive ribbon cable which is one of the items in your
motherboard package. After connecting the single end to the board, connect the two plugs at the
other end to the floppy drive(s). Remember, as in the last section, the red stripe on the edge of
the ribbon cable must be the nearest to PIN1 or your connection wont work. PIN1 is on the left as
shown below.
Floppy Disk Drive Connector
PIN1
FDC
Floppy Disk Drive Connector
Transcend