Intel TS-ASP3 Personal Computer User Manual


 
32 BIOS SETUP
Boot Up NumLock Status
Toggle between On and Off to control the state of the NumLock key when the system
boots. When toggled On, the numeric keypad generates numbers instead of controlling
cursor operations.
Gate A20 Option
Choose Fast (default) or Normal. Fast allows RAM access above 1MB to use the fast
Gate A20 line.
Typematic Rate Setting
When this function is disabled, the following two items (Typematic Rate and Typematic
Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard controller in
your system. When this function is enabled, you can select a typematic rate and typematic
delay.
Typematic Rate (Chars/Sec)
When the Typematic Rate setting is enabled, you can select a typematic rate (the rate at
which a character repeats) when you hold down a key of 6, 8, 10, 12, 15, 20, 24 or
30 characters per second.
Typematic Delay (Msec)
When the Typematic Delay setting is enabled, you can select a typematic delay (the delay
before key strokes begin to repeat) of 250, 500, 750 or 1000 milliseconds.
Security Option
If you have set a password, you can select whether the password is required while the
system boots, or only when you enter Setup.
OS Select for DRAM > 64MB
Select OS2 only if you are running OS/2 operating system with more than 64 MB of RAM
on your system.
Report No FDD For WIN 95
Select Yes to release IRQ6 when there is no floppy disk drive, for compatibility with WIN
95 logo certification.
Delay For HDD (Secs)
Generally, you can set this field as 0, but for some old Hard Disk Drives, you may need to
increase the delay time for BIOS to detect what type it is.