Intel TS-ASP3 Personal Computer User Manual


 
Parallel Port Mode
This field allows you to set the operation mode of the parallel port.
- SPP: Allows normal-speed operation, but in one direction only.
- EPP: Allows bi-directional parallel port operation at maximum speed.
- ECP: Allows DMA and bi-directional operation. It is faster than EPP mode.
- ECP + EPP: Allows normal speed operation in two-way mode.
EPP Mode Select
Select EPP port type 1.7 or 1.9.
ECP Mode Use DMA
Assign DMA channel 1 or 3 to the port for ECP mode operation.
PWR-ON After PWR-Fail
Choose if you want the system to automatically Power On after the power has failed.
- Off: Disable this function
- On: Enable this function
- Former-Sts: Not only Power On the system, but also to return it to its former status.
Game Port Address
Set Joystick Game Port Address. The choices are: Disabled, 201 and 209.
Midi Port Address
Set Midi Port Address. The choices are: Disabled, 330, 300 and 290.
Midi Port IRQ
Assign IRQ 5 or 10 to the Midi Port.
38 BIOS SETUP
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer) port.
The choices are: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 and Disabled.
Use IR Pins
This option selects IR transmission routing. Two choices are:
RxD2,TxD2 -> COMB Connector
IR-Rx2Tx2 -> IR Connector