Intel XP-P5CM-GL Computer Hardware User Manual


 
22
English
n PATA IDE Set to
Options: Ch.0 Master/Slave, Ch.1 Master/Slave (default:Ch.0 Master/Slave)
n SATA Port 0/2 Set to
This value depends on the settings of "On-Chip SATA Mode" and "PATA IDE Set to". For
example, if you set PATA IDE to Ch. 1 Master/Slave, this option will be automatically set to
Ch. 0 Master/Slave.
n USB Controller
Allows the user to enable or disable the onboard USB controller. (default:Enabled)
n USB 2.0 Controller
Allows the user to enable or disable the onboard USB2.0 (default:Enabled)
n USB Keyboard Support
Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard,
otherwise Disable) (default:Disabled)
n USB Mouse Support
Allows user to use a USB-based mouse (Enable if you are using a USB mouse,
otherwise Disable) (default:Disabled)
n AC97 Audio
Allows the user to use the onboard AC97 audio (default:Auto)
n Onboard H/W LAN
Allows the user to enable or disable the onboard LAN (default:Enabled)
n OnBoard LAN Boot ROM
Allows user to enable or disable booting from a network drive (default:Disabled)
n Onboard Serial Port 1
Allows the user to enable or disable the first onboard serial port
Options: Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)
n Onboard Parallel Port
Allows the user to enable or disable the onboard parallel port.
Options: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7)
n Parallel Mode
Use this to select the operation mode for the parallel port.
Options: SPP, EPP, ECP, EPP+ECP (default:SPP)
n ECP Mode Use DMA
Allows the user to select the ECP Mode Use DMA
Options: 1, 3, Disabled (default:3)