Filter
Top Products
23
internal function and does not affect the Connect On Demand function. Connect
On Demand is only effective for Disconnect PPP session if idle time is longer
than _ Min.
Connect Manually: With this option, users have to connect with the Internet
manually after disconnection. This option is only effective with Disconnect PPP
session if idle time is longer than _ Min.
Prevent reconnection although no response from PPP server: This option is for
shutting off the router’s internal automatic re-connection function. By choosing this
option, the router will not try to re-connect at once if an external network (ISP)
disconnects the connection.
4.3 Dynamic IP (Cable/Modem) Configuration
With this connection option, the router can get IP addresses automatically from an
ISP. It is suitable for connection options such as cable modem, LAN and so on.
1. Turn on the external cable modem and check the WAN LED of the router. If the
WAN LED is off, confirm that the network cable connection between the modem
and the WAN port is correct.
2. Click “Basic Setup” —> “WAN Setup.”
3. Choose DHCP User (Cable modem, VDSL, LAN, …)
4. Click “Apply” to complete.
5. You will see the following pop-up window:
If Conn. State shows “Successfully connected,” the configuration is correct.
Click “Show Internet Information” and proceed to section 4.5.1.